Ordering crown is as easy as:
1. Choosing Pattern.
2. Finding radius or providing height and width measurements.
3. Establishing if radius is inside (concave-ISR) or outside (convex-OSR).
4. Establishing which way crown is to be installed (see diagram).

Valuflex™ flexible moldings are sold in straight and preformed pieces. Straight pieces are used for standard base, chair rail and jamb applications. Casings, crowns and build-up applications require preformed pieces. Preformed pieces are achieved by providing precise measurements, radius or a template. Preformed pieces only have a variance of approx. 1” to 2” hence the importance of precise information. Curved crown applications, by far the most diverse, require a few simple rules of thumb (see easy ordering) to easily accomplish a perfect fit without stressing the material. A Build-up is several pieces of moldings put together to make a more dramatic application.

The maximum length of flexible product is 12’. The minimum length is 6’. All resin is sold by the whole foot only.

The smallest radius a part can be made is the width of the profile times 3. (ex. a 4-1/2” wide crown’s smallest radius is 13-1/2” - (4-1/2” width x 3)

Crown APPLICATIONS
Please include drawing of how crown is being installed in order for the Flex to match installation.

Directions of how to get a radius of a Dome Wall:
Take a straight board and walk towards wall until both ends touch the wall. Measure center distance from board to wall. By simply supplying us the 2 measurements, we can determine the radius of the wall:
1) length of board used
2) center rise (from board to wall) measurement